Products
Material
-
×
H Beam
Open full product pageH beam is an economical and efficient profile with a more optimized cross-sectional area distribution and a more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter “H”. Since all parts of the H-shaped steel are arranged at right angles, the H-shaped steel has the advantages of strong bending resistance in all directions, simple construction, cost saving and light structure weight, and has been widely used.
In stock -
×
Truss Beam
Open full product pageTruss girder is an important structural framework specially used for bridge construction. It is a beam bridge with truss as the main load-bearing structure.
In stock -
×
Steel Box Girder
Open full product pageSteel box girder, also called steel plate box girder, is a common structural form for long-span bridges. It is generally used on bridges with larger spans. It is called steel box girder because it looks like a box. Steel plate box girder is a commonly used structural form in engineering. In order to study the influence of the spacing of diaphragms on the distortion of simply supported steel box girders under concentrated loads, simply supported steel box girders with different numbers of diaphragms are set up, and the distortion effect and rigid torsion effect under concentrated loads are compared to obtain the maximum distortion effect curve with the number of diaphragms. A concentrated load is applied to the top of the box girder web, and the load decomposition method is used to calculate according to four working conditions: distortion, rigid torsion, symmetrical bending and eccentric load.
In stock
-
×
Special Shaped Steel Column
Open full product pageSpecial shaped steel column is the abbreviation of column with special cross section. Here, the so-called “special cross section” refers to the column cross section whose geometric shape is different from the commonly used rectangular cross section.
Specially shaped column cross section is L-shaped, T-shaped and cross-shaped, and the height to thickness ratio of each limb of the cross section is not greater than 4.In stock -
×
Steel Structure Box
Open full product pageSteel structure box columns are made of steel plates bent into a box-shaped cross-section shape. Steel structure manufacturers will connect them through welding, bolts, etc. to form steel structure components. Compared with traditional concrete columns and other structural components, steel structure components have the advantages of light weight, high strength, fast construction speed, and corrosion resistance. Therefore, they have been widely used in modern buildings.
In stock -
×
Steel Cross Column
Open full product pageSteel cross column refers to a structure consisting of two or more steel columns crossing each other. It is usually used in the support system of large-span buildings. It can provide higher bending stiffness and bearing capacity. Steel cross column plays an important role in construction projects.
In stock -
×
H Steel Column
Open full product pageH steel column is an economical and efficient profile with a more optimized cross-sectional area distribution and a more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter “H”. Since all parts of the H steel column are arranged at right angles, the H-beam has the advantages of strong bending resistance in all directions, simple construction, cost savings and light structural weight, and has been widely used. An economical cross-sectional profile with a cross-sectional shape similar to the capital Latin letter H, also known as a universal steel beam, wide flange (edge) I-beam or parallel flange I-beam. The cross-section of the H-beam usually includes two parts: the web and the flange plate, also known as the waist and the edge.
In stock -
×
Compression Member
Open full product pageLattice columns have some characteristics and advantages, such as arranging the material area far from the inertia axis, which can enhance the bending resistance of the component under the same axial resistance conditions and save materials.
In stock
-
×
Color Steel Sandwich Panel
Open full product pageProduct Overview
Color steel sandwich panels are high-performance building materials designed for insulation, strength, and fast installation. They are widely used in industrial buildings, warehouses, workshops, cold storage, and modular construction projects.
Product Description
Our Color Steel Sandwich Panels are made of high-quality color-coated steel sheets combined with an insulating core material. This structure provides excellent thermal insulation, soundproofing, and structural stability while maintaining a lightweight design.
These panels are manufactured with precise bonding technology to ensure strong adhesion between layers, resulting in long service life and reliable performance. With a clean appearance and multiple color options, they are suitable for both functional and aesthetic building requirements.
The panels support fast installation, helping reduce construction time and overall project costs.
Key Features
-
Excellent thermal and sound insulation performance
-
Lightweight structure with high strength
-
Fire-resistant and weather-resistant options available
-
Fast and easy installation
-
Smooth surface with clean and modern appearance
Specifications
-
Panel Thickness: 50mm / 75mm / 100mm / 150mm
-
Steel Thickness: 0.3mm – 0.8mm
-
Core Material: EPS / PU / PIR / Rock Wool
-
Panel Width: Standard 950mm / 1000mm (effective width)
-
Length: Customized according to requirements
-
Surface Color: White, Blue, Gray, Red (custom colors available)
Applications
-
Industrial plants and workshops
-
Warehouses and logistics centers
-
Cold storage and refrigerated rooms
-
Prefabricated houses and modular buildings
-
Commercial and agricultural buildings
Performance Advantages
-
Reduces energy consumption through effective insulation
-
Improves indoor comfort and noise control
-
Strong resistance to wind and weather conditions
-
Low maintenance cost and long service life
Customization Service
We offer customized solutions including panel thickness, core material, steel thickness, color, and length to meet different project requirements. OEM and bulk orders are welcome.
Packaging & Transportation
-
Protective film and export-standard packaging
-
Suitable for container loading and long-distance transportation
-
Stable supply capacity with on-time delivery
Why Choose Our Color Steel Sandwich Panels
-
Strict quality control during production
-
Competitive pricing for large-volume orders
-
Experienced supplier for international projects
-
Professional technical support and after-sales service
In stock -
-
×
PC Sunshine Board
Open full product pagePC sunshine board is mainly made of PC/PET/PMMA/PP material and ABS plus PC material, FRP resin. In English, it is polycarbonate hollow sheet or pet sheet or pmma sheet or pp sheet. The term “sunshine board” is the common name for polycarbonate hollow board in China, and is generally not used to refer to other hollow boards. Corresponding to its sibling product polycarbonate endurance board, the physical properties of the sunshine board are hollow boards. The plug-in sunshine board plays an obvious role on the wall. The thickness of the plug-in sunshine board is 40mm and the width is 50cm.
In stock -
×
Polyurethane Board
Open full product pagePolyurethane board is composed of two layers of waterproof color coated steel plates or other metal panels with flame retardant polyurethane rigid foam injected in the middle. It is recognized as the best thermal insulation material in the world today.
In stock -
×
Color Steel Plate
Open full product pageColor steel plate refers to color-coated steel plate, which is a steel plate with an organic coating. Color steel plate is divided into single plate, color steel composite plate, floor decking plate, etc., which are widely used in large public buildings, public factories, mobile houses, and walls and roofs of integrated houses. Advantages of color steel plate: light texture, excellent thermal insulation performance; easy installation, etc.
In stock -
×
Color Steel Edging
Open full product pageColor steel edging is made of pressed color steel metal plates and is used for diagonals and joints of color steel sandwich panels. It is made of the same material as the wall or roof panels.
In stock
-
×
Bolts and Nuts
Open full product pageProduct Overview
High-quality bolts and nuts designed for strong, reliable, and long-lasting fastening solutions. Ideal for construction, machinery, automotive, and industrial applications.
Product Description
Our Bolts and Nuts are manufactured using premium raw materials and advanced production techniques to ensure superior strength, durability, and precision. These fasteners provide stable and secure connections, even in high-load and harsh working environments.
With accurate threading and excellent surface finishing, our bolts and nuts allow easy installation and long-term performance. We offer a wide range of specifications to meet international standards and support customized requirements for different industries.
Key Features
-
High tensile strength for heavy-duty fastening
-
Precision thread ensures tight and secure fit
-
Excellent resistance to corrosion and wear
-
Smooth surface finish for easy installation
-
Available in various sizes and standards
Specifications
-
Material: Carbon Steel / Stainless Steel / Alloy Steel
-
Standard: DIN / ANSI / ISO / JIS
-
Size Range: M3 – M36 (Custom sizes available)
-
Surface Finish: Zinc Plated, Black Oxide, Galvanized, Plain
-
Grade: 4.8 / 8.8 / 10.9 / 12.9
Applications
-
Construction and infrastructure projects
-
Automotive and transportation industry
-
Machinery and equipment manufacturing
-
Electrical and mechanical installations
-
Industrial and general hardware use
Quality Assurance
Each batch of bolts and nuts undergoes strict quality inspection to ensure dimensional accuracy, mechanical performance, and surface quality in accordance with international standards.
Customization & OEM Service
We support OEM and ODM services, including customized size, material, surface treatment, and packaging based on customer requirements.
Packaging & Delivery
-
Standard export carton or pallet packaging
-
Customized packaging available
-
Stable production capacity and fast delivery
Why Choose Us
-
Reliable manufacturer with professional export experience
-
Competitive pricing for bulk and wholesale orders
-
Consistent quality and stable supply
-
Responsive customer support
In stock -
-
×
Unpowered Ventilator
Open full product pageUnpowered ventilators, also known as roof ventilators, natural ventilators, power-free ventilators, and turbine ventilators, are ventilation equipment installed on both sides of the roof ridge of industrial plants. They can replenish sufficient outdoor fresh air 24 hours a day without electricity, promote air circulation and convection in the plant, improve the working environment, and ensure the health of employees.
In stock -
×
Grid Rods
Open full product pageRods refer to components whose longitudinal (length direction) dimensions are much larger than their transverse (perpendicular to the length direction) dimensions. Grid rods are one of the important components of grid structures, and multiple rods are connected by bolt balls.
In stock -
×
Gutter
Open full product pageGutter refers to the concave part between the two spans of the roof of a building. Roof drainage is divided into organized drainage and unorganized drainage (free drainage). Organized drainage generally collects rainwater into the gutter and then drains it through the rainwater pipe. The ditch that collects rainwater is called the gutter. Gutters are divided into internal gutters and external gutters. Internal gutters refer to gutters inside the outer wall, which usually have parapets; external gutters are gutters that extend out of the outer wall, which usually do not have parapets.
In stock -
×
Bolt Ball
Open full product pageBolt balls are mostly used in grid structures. The main structural feature is that multiple holes with internal threads are opened on a ball to connect multiple rods at one point. Bolt balls are mainly used in the fields of oil pipe-free downhole oil production equipment, casing explosion expanders, oil pipe diameter gauges, etc. They are also used in grid steel structures to connect rods to rods.
In stock -
×
z shape steel
Open full product pageZ shape steel is a common cold-bent thin-walled steel with a thickness of 1.6-3.0mm and a section height of 120-350mm. The processed material is hot-rolled (painted) and galvanized. The processing standard is in accordance with GB50018-2002. Z shape steel is usually used in large steel structure workshops. The processing length and holes are produced according to the processing requirements.
In stock -
×
C Shaped Steel
Open full product pageC shaped steel is automatically processed and formed by C shaped steel forming machines. C shaped steel forming machines can automatically complete the C shaped steel forming process according to the given C shaped steel size. It is widely used in purlins and wall beams of steel structure buildings, and can also be combined into lightweight roof trusses, brackets and other building components. In addition, it can also be used for columns, beams and arms in mechanical light industry manufacturing.
In stock
