Steel beam
-
×
Special Shaped Steel Column
Open full product pageSpecial shaped steel column is the abbreviation of column with special cross section. Here, the so-called “special cross section” refers to the column cross section whose geometric shape is different from the commonly used rectangular cross section.
Specially shaped column cross section is L-shaped, T-shaped and cross-shaped, and the height to thickness ratio of each limb of the cross section is not greater than 4.In stock -
×
Steel Structure Box
Open full product pageSteel structure box columns are made of steel plates bent into a box-shaped cross-section shape. Steel structure manufacturers will connect them through welding, bolts, etc. to form steel structure components. Compared with traditional concrete columns and other structural components, steel structure components have the advantages of light weight, high strength, fast construction speed, and corrosion resistance. Therefore, they have been widely used in modern buildings.
In stock -
×
Steel Cross Column
Open full product pageSteel cross column refers to a structure consisting of two or more steel columns crossing each other. It is usually used in the support system of large-span buildings. It can provide higher bending stiffness and bearing capacity. Steel cross column plays an important role in construction projects.
In stock -
×
H Steel Column
Open full product pageH steel column is an economical and efficient profile with a more optimized cross-sectional area distribution and a more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter “H”. Since all parts of the H steel column are arranged at right angles, the H-beam has the advantages of strong bending resistance in all directions, simple construction, cost savings and light structural weight, and has been widely used. An economical cross-sectional profile with a cross-sectional shape similar to the capital Latin letter H, also known as a universal steel beam, wide flange (edge) I-beam or parallel flange I-beam. The cross-section of the H-beam usually includes two parts: the web and the flange plate, also known as the waist and the edge.
In stock -
×
Compression Member
Open full product pageLattice columns have some characteristics and advantages, such as arranging the material area far from the inertia axis, which can enhance the bending resistance of the component under the same axial resistance conditions and save materials.
In stock