Steel column and steel beam
-
×
Special Shaped Steel Column
Open full product pageSpecial shaped steel column is the abbreviation of column with special cross section. Here, the so-called “special cross section” refers to the column cross section whose geometric shape is different from the commonly used rectangular cross section.
Specially shaped column cross section is L-shaped, T-shaped and cross-shaped, and the height to thickness ratio of each limb of the cross section is not greater than 4.In stock -
×
Steel Structure Box
Open full product pageSteel structure box columns are made of steel plates bent into a box-shaped cross-section shape. Steel structure manufacturers will connect them through welding, bolts, etc. to form steel structure components. Compared with traditional concrete columns and other structural components, steel structure components have the advantages of light weight, high strength, fast construction speed, and corrosion resistance. Therefore, they have been widely used in modern buildings.
In stock -
×
Steel Cross Column
Open full product pageSteel cross column refers to a structure consisting of two or more steel columns crossing each other. It is usually used in the support system of large-span buildings. It can provide higher bending stiffness and bearing capacity. Steel cross column plays an important role in construction projects.
In stock -
×
H Steel Column
Open full product pageH steel column is an economical and efficient profile with a more optimized cross-sectional area distribution and a more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter “H”. Since all parts of the H steel column are arranged at right angles, the H-beam has the advantages of strong bending resistance in all directions, simple construction, cost savings and light structural weight, and has been widely used. An economical cross-sectional profile with a cross-sectional shape similar to the capital Latin letter H, also known as a universal steel beam, wide flange (edge) I-beam or parallel flange I-beam. The cross-section of the H-beam usually includes two parts: the web and the flange plate, also known as the waist and the edge.
In stock -
×
H Beam
Open full product pageH beam is an economical and efficient profile with a more optimized cross-sectional area distribution and a more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter “H”. Since all parts of the H-shaped steel are arranged at right angles, the H-shaped steel has the advantages of strong bending resistance in all directions, simple construction, cost saving and light structure weight, and has been widely used.
In stock -
×
Truss Beam
Open full product pageTruss girder is an important structural framework specially used for bridge construction. It is a beam bridge with truss as the main load-bearing structure.
In stock -
×
Steel Box Girder
Open full product pageSteel box girder, also called steel plate box girder, is a common structural form for long-span bridges. It is generally used on bridges with larger spans. It is called steel box girder because it looks like a box. Steel plate box girder is a commonly used structural form in engineering. In order to study the influence of the spacing of diaphragms on the distortion of simply supported steel box girders under concentrated loads, simply supported steel box girders with different numbers of diaphragms are set up, and the distortion effect and rigid torsion effect under concentrated loads are compared to obtain the maximum distortion effect curve with the number of diaphragms. A concentrated load is applied to the top of the box girder web, and the load decomposition method is used to calculate according to four working conditions: distortion, rigid torsion, symmetrical bending and eccentric load.
In stock -
×
Compression Member
Open full product pageLattice columns have some characteristics and advantages, such as arranging the material area far from the inertia axis, which can enhance the bending resistance of the component under the same axial resistance conditions and save materials.
In stock -
×
Multi-Layer Cylinder
Open full product pageThe design of Multi-layer cylinder can provide unique visual effects, and its appearance can be customized according to specific design requirements to meet the needs of different tastes, thereby enhancing the overall aesthetics. It is light, corrosion-resistant and easy to maintain.
In stock